Custom Box Styles and What Each One Is For

The box style is the first decision on any packaging job. It sets how the box closes and how much weight the base can carry. It also sets how fast someone can pack it and whether the box survives a courier on its own.

We cut and print fifteen structures in house and the groups below sort them by the job they do rather than by how they look. Find the group that matches your product and the shortlist usually comes down to two or three styles.

Three questions to help you choose a box style

Three answers narrow fifteen styles down to one so work through all three before you look at any picture.

01. What does the packed product weigh?

Anything under about a pound sits comfortably in a tuck end carton. Above that weight the base needs to lock rather than tuck. Once the packed weight passes about two pounds you are into corrugated.

02. Does the box travel on its own?

A box that goes into a courier network with no outer carton needs fluted board. A box that ships inside an outer can stay in flat paperboard and keep the better print surface.

03. How does the customer open it?

When presentation matters or you want the customer to keep the box for storage, choose a rigid box with a lid

Retail Cartons

These boxes represent your product on the shelf or counter. Paperboard is a common choice while sealed display and dispenser styles are also available. Every one of them runs on flat paperboard so the printed surface stays crisp.

Straight Tuck End Box structure illustration

Straight Tuck End Box

Both end flaps tuck in the same way (towards the back of carton), leaving the front panel clear for your branding. It is the most common retail carton in the world because it prints beautifully and packs fast.

Board: 300 to 350 GSM SBS

Closure: Tuck flaps at both ends

Best for: Cosmetics, soap, supplements, confectionery

View Straight Tuck End Box →
Tray and Sleeve Box structure illustration

Tray and Sleeve Box

Your artwork is printed on the sleeve. When a flavor or season changes you can simply change the sleeve while keeping the same tray.

Board: 300 GSM sleeve over a 350 GSM tray

Closure: Friction fit sleeve

Best for: Variant ranges, seasonal lines, sample sets

View Tray and Sleeve Box →
Seal End Box structure illustration

Seal End Box

Seal end boxes are made using glued end flaps and are suited to filling lines. Tell us how your product will be packed so we confirm the right closure.

Board: 300 to 350 GSM SBS

Closure: Glued flaps at both ends

Best for: Cereal, snack lines, frozen food, pharmacy cartons

View Seal End Box →
Dispenser Box structure illustration

Dispenser Box

A perforated panel tears away so the customer reaches the product through the opening rather than lifting a lid. The rest of the carton stays rigid and keeps holding the contents upright as the box empties.

Board: 300 to 400 GSM SBS, or E flute for heavier fills

Closure: Glued or tucked end with a perforated opening

Best for: Sachets, wipes, bars, counter refills

View Dispenser Box →
Display Box structure illustration

Display Box

The front tears away on the counter so one carton ships the product and then presents it. A locking base carries the weight of a full tray without bowing under the load.

Board: 350 to 400 GSM SBS, or E flute corrugated

Closure: Locking base with a tear away front

Best for: Counter displays, impulse lines, retail promotions

View Display Box →

Gift & Carry Boxes

These styles are built for a box the customer keeps or carries. The structure is part of the gift rather than a wrapper around it.

Two Piece Box structure illustration

Two Piece Box

A separate lid and base in rigid greyboard with a printed paper wrap. It ships assembled rather than flat and it is built to be kept instead of torn open.

Board: 1.5 to 2 mm greyboard with a printed wrap

Closure: Lift off lid

Best for: Jewelry, spirits, cosmetics, corporate gifts

View Two Piece Box →
Gable Box structure illustration

Gable Box

The top folds into a carry handle so the pack needs no bag around it. It arrives flat and a packer squares it up in one movement.

Board: 300 to 350 GSM SBS

Closure: Gable handle lock

Best for: Party favors, takeout meals, gift sets

View Gable Box →

Trays and shipping boxes

These styles handle weight and speed rather than shelf appearance. One locks its base for faster packing and the other two protect your product through a courier network.

Auto Bottom Tray structure illustration

Auto Bottom Tray

The base locks itself as the tray is squared up because the glue is applied in the factory. A packer makes one movement instead of folding four flaps by hand.

Board: 350 to 400 GSM SBS

Closure: Auto lock base

Best for: Heavier retail packs, multi piece sets, hampers

View Auto Bottom Tray →
Roll End Tuck Front Mailer structure illustration

Roll End Tuck Front Mailer

A corrugated mailer with a self locking base and side wings and a front tuck. This is the style for a box that goes into a courier network with nothing protecting it.

Board: E flute at 32 ECT

Closure: Self lock base with a front tuck

Best for: Direct to consumer parcels, subscription boxes

View Roll End Tuck Front Mailer →
Full Flap Shipping Box structure illustration

Full Flap Shipping Box

The outer flaps overlap completely so the top and the base carry a double thickness of board. That doubled panel is what holds up when a dense product presses down through a long transit.

Board: B or C flute at 32 ECT and above

Closure: Full overlap flaps sealed with tape

Best for: Dense or heavy products, long transit, stacked freight

View Full Flap Shipping Box →

Food service boxes

Every style in this group runs on food grade board. Grease resistance and venting matter more here than shelf appearance.

Pizza Box structure illustration

Pizza Box

Corrugated with locking corners and vent holes so steam escapes instead of softening the base. It stores flat and it squares up on the counter in seconds.

Board: B or E flute corrugated

Closure: Corner lock with a front tuck

Best for: Pizzerias, flatbreads, pies

View Pizza Box →
Four Corner Cake Box structure illustration

Four Corner Cake Box

One sheet of board folds into a tray with four locking corners. The flat base keeps anything soft or layered from tilting on the way to the counter.

Board: 350 to 400 GSM food grade board

Closure: Four corner lock

Best for: Bakery items, pastries, single cakes

View Four Corner Cake Box →
Six Corner Cake Box structure illustration

Six Corner Cake Box

This tray uses six locking corners rather than the usual four. The extra locks hold the walls upright when the tray runs taller or the contents get heavier.

Board: 350 to 400 GSM food grade board

Closure: Six corner lock

Best for: Layer cakes, heavier trays, deep fills

View Six Corner Cake Box →
Popcorn Box structure illustration

Popcorn Box

A tapered tub with a scalloped rim that nests inside the next one. It takes very little counter space and it opens in a single motion during a rush.

Board: Grease resistant food grade board

Closure: Glued side seam

Best for: Concessions, cinemas, events

View Popcorn Box →
French Fry Box structure illustration

French Fry Box

A scoop shape that stays open while it is filled and holds its form in a tray. It folds flat in storage until the moment somebody needs it.

Board: Grease resistant food grade board

Closure: Glued seam with a scoop front

Best for: Fries, wedges, snack portions

View French Fry Box →

Every style compared on board and closure

Use this table when you already know the shortlist and you want to check the specification before you ask for a dieline.

Box styleBoard we quoteHow it closesBest for
Straight Tuck End Box300 to 350 GSM SBSTuck flaps at both endsCosmetics, soap, supplements, confectionery
Tray and Sleeve Box300 GSM sleeve over a 350 GSM trayFriction fit sleeveVariant ranges, seasonal lines, sample sets
Seal End Box300 to 350 GSM SBSGlued flaps at both endsCereal, snack lines, frozen food, pharmacy cartons
Dispenser Box300 to 400 GSM SBS, or E flute for heavier fillsGlued or tucked end with a perforated openingSachets, wipes, bars, counter refills
Display Box350 to 400 GSM SBS, or E flute corrugatedLocking base with a tear away frontCounter displays, impulse lines, retail promotions
Two Piece Box1.5 to 2 mm greyboard with a printed wrapLift off lidJewelry, spirits, cosmetics, corporate gifts
Gable Box300 to 350 GSM SBSGable handle lockParty favors, takeout meals, gift sets
Auto Bottom Tray350 to 400 GSM SBSAuto lock baseHeavier retail packs, multi piece sets, hampers
Roll End Tuck Front MailerE flute at 32 ECTSelf lock base with a front tuckDirect to consumer parcels, subscription boxes
Full Flap Shipping BoxB or C flute at 32 ECT and aboveFull overlap flaps sealed with tapeDense or heavy products, long transit, stacked freight
Pizza BoxB or E flute corrugatedCorner lock with a front tuckPizzerias, flatbreads, pies
Four Corner Cake Box350 to 400 GSM food grade boardFour corner lockBakery items, pastries, single cakes
Six Corner Cake Box350 to 400 GSM food grade boardSix corner lockLayer cakes, heavier trays, deep fills
Popcorn BoxGrease resistant food grade boardGlued side seamConcessions, cinemas, events
French Fry BoxGrease resistant food grade boardGlued seam with a scoop frontFries, wedges, snack portions

What applies to every style we print

The commercial terms below apply to every style on this page and they do not change with the structure you pick.

Minimum order100 boxes per size and per design
Setup and toolingNo charge on the first order or on any reorder
Production8 to 12 business days after you approve the dieline, and 10 to 15 for rigid two piece boxes
SamplesA plain structural sample takes 3 to 5 working days and a printed sample takes 7 to 10.
Dieline and 3D mockupFree before you commit to anything
Design supportFree at every stage, including setting your file onto our dieline
Price break1,000 units on the same artwork
ShippingFree worldwide on all orders

What to send us

Tell us what the product is and what it weighs packed. Whether the box ships on its own or inside an outer carton.Those two answers are usually enough for us to recommend a style and we will cut you a dieline.

Artwork comes to us as an AI, EPS or PDF file set on our dieline. If you are not sure which style fits then send a photo of the product with its dimensions. We will come back with two options and a price for each.

We print in Copper Dr, Newport, DE 19804, USA and Email us anytime. Our team is available from Monday to Friday, 8 am to 5 pm EST.