Consultation
Send your product size, quantity and deadline. Not sure which board or style fits? Tell us what goes inside and we will specify it for you, then quote within 24 hours.
A six corner cake box uses six locking tabs instead of four. The extra locks sit along the long walls and they stop the sides bowing outward when the tray runs tall or the contents get heavy.
Everything else works like a four corner tray. It folds from one sheet, it locks without glue and the base stays flat.
Get Custom Quote
| Specification | Detail |
|---|---|
| Box style | One piece tray with six locking tabs. |
| Use case | Wall heights above about 80 mm and heavier packed weights. |
| Board | 350 to 400 GSM food grade board. Grease resistant coating for buttery products. |
| Sizing | Internal length by width by height. Allow 10 mm or more around the product. |
| Common sizes | 200 by 200 mm up to 400 by 300 mm. Any size cut to order. |
| Lid options | Hinged lid, separate lift off lid, slip over sleeve. |
| Window option | PET patch window in the lid or the front wall. |
| Printing and finishes | Digital or offset. Lamination on the outside face only. |
| Minimum order | 100 boxes per size and per design. |
| Production time | 8 to 12 business days after dieline approval. |
| Samples | A plain structural sample takes 3 to 5 working days and a printed sample takes 7 to 10. |
| Pricing | No setup or tooling charge. Break at 1,000 units. |
| Artwork and design | AI, EPS or PDF on our dieline. Design support free at every stage. |
| Shipping | Free shipping worldwide on all orders. |
On a four corner tray the walls are held only at the ends. As the wall gets taller or the load gets heavier the middle of the long wall starts to bow outward and the lid then sits badly.
Six locks add a hold along the length of the wall. The tray keeps its shape under load and the lid keeps meeting the wall square. That is the difference you feel when you carry a full box by hand.
The trade off is board. A six corner tray uses a slightly larger sheet for the same internal size so the unit price sits a little above the four corner version.
Choose six corners once the wall height passes roughly 80 mm or once the packed weight starts to feel heavy in one hand. Layer cakes, deep fill desserts and multi item bakery boxes all fall into that group.
Stay with four corners for a single cupcake tray, a flat pastry box or anything shallow. Paying for locks you do not need is the same mistake as specifying a heavier board than the product requires.
If you are unsure then order a sample of each. At $19.99 each that comparison costs less than one wasted production run.
Use 350 to 400 GSM food grade board as the working range, which is what most of our food packaging boxes are made from. On very tall trays or heavy fills we move to the top of that range because stiffness rather than thickness is what keeps the walls straight.
Where the product is buttery or iced we quote a grease resistant coated board since fat migrates into uncoated fiber and marks the outside of the box.
Tell us what goes inside and whether the food touches the board directly. That answer decides the material rather than the style and it is the detail buyers leave out most often. Confirm your own local food contact requirements with your supplier of record before a run.
Give us internal length, width and height. Allow at least 10 mm around a decorated product and more where icing is piped or a topper stands proud.
Tell us the packed weight as well. On this style weight decides the board grade and sometimes the lock count, which is not true on a shallow tray.
Common sizes run from about 200 by 200 mm up to 400 by 300 mm, with wall heights from 80 mm upward. Any size is cut to order with no tooling charge.
Lid options are the same as the four corner tray and most other types of custom boxes. A hinged lid from the same sheet keeps the pack to one component. A separate lift off lid loads faster on a counter, and a slip over sleeve carries seasonal artwork over a plain tray.
A window takes a clear PET patch on food work. Flat board prints well so full color artwork works on every panel, with digital printing below about 1,000 units and offset above that figure.
Keep lamination on the outside face where the food does not touch it. Gloss or matte lamination protects the print from handling and from condensation on a refrigerated product.
Send artwork as an AI, EPS or PDF file set on our dieline in CMYK at 300 dpi with 3 mm of bleed. Design support is free at every stage so we will fix a file that is not print ready rather than send it back.
Two limits apply whatever you choose. Keep positive type at 6 pt or larger and reversed type at 8 pt or larger because ink spreads slightly on board and fine reversed type fills in. Keep every line weight at 0.25 pt or above for the same reason.
The minimum is 100 boxes per size and per design. Each size needs its own die so two sizes on one artwork counts as two minimums. There is no setup or tooling charge on the first order or on any reorder and the price break lands at 1,000 units.
Production runs 8 to 12 business days after you approve the dieline. A plain structural sample takes 3 to 5 working days and a printed sample takes 7 to 10.. Shipping is free worldwide on every order.
Email Sales@boxesexpert.com with your dimensions and quantity and we will send a dieline, a 3D mockup and a price.
Creating custom boxes is now easy with us. See how our process works.
Send your product size, quantity and deadline. Not sure which board or style fits? Tell us what goes inside and we will specify it for you, then quote within 24 hours.
Upload your artwork and our team will refine it to perfection. No artwork? No problem. Just tell us about your product and we will turn your ideas into beautifully designed packaging.
Nothing reaches the press until you approve it. You get a digital proof as standard and a physical sample on request, so you can check everything yourself before the full run.
After production, every box goes through our strict quality control process to ensure it meets our standards. Once approved, your packaging is carefully prepared and delivered free to your own doorstep.
What buyers ask before ordering custom six corner cake boxes: when six locks beat four, board grades, sizing, lids and windows and minimum quantities.
Apart from branding benefits, we deliver premium packaging solutions that combine durability, quality printing, and eco-friendly materials. Our team ensures every box meets your brand’s identity and market needs.
We use high-grade materials and advanced printing technology to ensure superior packaging quality.
Competitive rates designed to support businesses of all sizes.
We ensure timely production and delivery without compromising product quality.