Home / Box Styles / Pizza Boxes
‹
Custom pizza box with cut corners, open
›
Custom pizza box with cut corners, open
Custom pizza box with cut corners, closed
Flat dieline template for a pizza box with cut corners

Custom Pizza Boxes

A pizza box is a corrugated tray with locking corners, a front tuck and vent holes cut into the walls. It stores flat and squares up on a counter in a couple of seconds.

Every design decision on this style comes back to steam. A pizza leaving an oven releases moisture for several minutes and a box that traps it turns the base soft before the customer gets home.

Get Custom Quote


Pizza box specifications

Custom pizza boxes specification sheet
Specification Detail
Box styleCorrugated tray with corner locks, front tuck and side vents.
BoardB flute about 3 mm standard. E flute about 1.5 mm on small and slice boxes.
LinerKraft liner standard. White liner for heavier printing.
Grease resistanceGrease resistant liner quoted where contents are oily.
Sizes10, 12, 14, 16 and 18 inch as standard. Any size cut to order.
ClearanceAbout 10 to 15 mm across the box over the pizza diameter.
VentsDie cut vent holes in the side walls so steam escapes.
OptionsDie cut lid handle, inner lid printing, tear line serving tray.
Minimum order100 boxes per size and per design.
Production time8 to 12 business days after dieline approval.
SamplesA plain structural sample takes 3 to 5 working days and a printed sample takes 7 to 10.
PricingNo setup or tooling charge. Break at 1,000 units.
Artwork and designAI, EPS or PDF on our dieline. Design support free at every stage.
ShippingFree shipping worldwide on all orders.

Everything about custom pizza boxes

Why vents matter more than anything else

Hot food gives off steam and that steam condenses on whatever it touches. Inside a sealed box it lands on the base and on the underside of the crust.

Vent holes let that moisture escape while the box is closed. They are small die cut openings along the side walls rather than holes in the top so heat stays in and water vapor gets out.

Skip the vents and the base goes soft within about fifteen minutes. It is the single most common complaint on a cheap pizza box and it is a structural problem rather than a board problem.

Board and strength

Use B flute corrugated on most pizza work because it is about 3 mm thick and it gives the stacking strength a delivery bag needs. E flute at about 1.5 mm suits smaller sizes and slice boxes where the pack does not carry much weight.

Kraft liner is the standard and it holds heat well. A white liner gives a better print surface but it shows grease faster so it suits a brand that prints heavily rather than a high volume takeaway.

Tell us how many boxes get stacked in a delivery bag. Stacking is what decides the ECT grade, not the size of the pizza.

Sizes and how they are measured

Pizza boxes are quoted by internal width across the box, matching the pizza diameter. Common sizes run from 10 inch through 12, 14, 16 and 18 inch.

Always give us the pizza diameter and we add the clearance. A box cut exactly to the pizza size traps the edge of the crust when the lid closes. Around 10 to 15 mm of clearance across the box is the usual allowance.

The corner locks need to suit the depth. A deeper box for a stuffed crust needs a taller wall and a longer lock. That is a different dieline rather than the same one scaled up.

Printing on a grease facing box

Corrugated takes ink well enough for branding with one thing to design around. Under press pressure the flute telegraphs through the liner as faint stripes across large solid areas, which is called washboarding and shows worst on dark solids.

Bolder shapes, lighter backgrounds and one or two strong colors survive best on flute. A two color print on kraft is the most reliable look on this style and it is usually the cheapest as well, which is why it shows up on so many takeaway custom packaging boxes.

Grease resistance comes from the board rather than from a coating on the print side. A laminate on the inner face changes how the box recycles and how it behaves with hot food. We quote a grease resistant liner where the contents are oily.

Structural options

A locking front tuck stops the lid springing open in a delivery bag. Corner locks hold the walls square when the box is carried on one hand.

Optional additions include a die cut handle in the lid, a printed inner lid message and a tear line that turns the lid into a serving tray. All of these are die changes on the same board rather than added components, the same way they work across our other custom box styles.

Food contact and materials

Tell us what goes inside and whether the food touches the board directly. That answer decides the material rather than the style and it is the detail buyers leave out most often. Confirm your own local food contact requirements with your supplier of record before a run.

What your artwork has to hold

Send artwork as an AI, EPS or PDF file set on our dieline in CMYK at 300 dpi with 3 mm of bleed. Design support is free at every stage so we will fix a file that is not print ready rather than send it back.

Two limits apply whatever you choose. Keep positive type at 6 pt or larger and reversed type at 8 pt or larger because ink spreads slightly on board and fine reversed type fills in. Keep every line weight at 0.25 pt or above for the same reason.

Ordering and lead times

The minimum is 100 boxes per size and per design. Each size needs its own die so two sizes on one artwork counts as two minimums. There is no setup or tooling charge on the first order or on any reorder and the price break lands at 1,000 units.

Production runs 8 to 12 business days after you approve the dieline. A plain structural sample takes 3 to 5 working days and a printed sample takes 7 to 10. Shipping is free worldwide on every order.

Email Sales@boxesexpert.com with your dimensions and quantity and we will send a dieline, a 3D mockup and a price.

How To Get Started

Creating custom boxes is now easy with us. See how our process works.

Consultation

Send your product size, quantity and deadline. Not sure which board or style fits? Tell us what goes inside and we will specify it for you, then quote within 24 hours.

Design

Upload your artwork and our team will refine it to perfection. No artwork? No problem. Just tell us about your product and we will turn your ideas into beautifully designed packaging.

Proof

Nothing reaches the press until you approve it. You get a digital proof as standard and a physical sample on request, so you can check everything yourself before the full run.

Delivery

After production, every box goes through our strict quality control process to ensure it meets our standards. Once approved, your packaging is carefully prepared and delivered free to your own doorstep.

Frequently Asked Questions

What buyers ask before ordering custom pizza boxes: vents and soggy bases, flute grades, sizing against pizza diameter, printing on corrugated and minimum quantities.

Hot food releases steam for several minutes and that steam condenses on the base. Vent holes in the side walls let the moisture out while the heat stays in. Without them the base goes soft within about fifteen minutes.
B flute at about 3 mm is standard, because it gives the stacking strength a delivery bag needs. E flute at about 1.5 mm suits smaller sizes and slice boxes where the pack carries less weight.
Common sizes run 10, 12, 14, 16 and 18 inch measured across the inside of the box. Give us the pizza diameter and we add the clearance, which is usually 10 to 15 mm across the box.
Kraft is the standard and it holds heat well. A white liner prints better but it shows grease faster, so it suits a brand that prints heavily rather than a high volume takeaway.
Good for branding rather than for photography. The flute telegraphs through the liner as faint stripes on large solid areas, which is called washboarding. Bold shapes and one or two strong colors on kraft is the most reliable look.
We quote a grease resistant liner where the contents are oily. Tell us what goes inside and whether the food touches the board directly, because that decides the material.
Yes. A die cut handle in the lid, a printed message on the inner lid and a tear line that turns the lid into a serving tray are all die changes on the same board.
The minimum is 100 boxes per size and per design. Production runs 8 to 12 business days after dieline approval, and a plain structural sample takes 3 to 5 working days and a printed sample takes 7 to 10.

Why Choose Us For Custom Boxes?

Apart from branding benefits, we deliver premium packaging solutions that combine durability, quality printing, and eco-friendly materials. Our team ensures every box meets your brand’s identity and market needs.

Premium Quality

We use high-grade materials and advanced printing technology to ensure superior packaging quality.

Affordable Pricing

Competitive rates designed to support businesses of all sizes.

Fast Delivery

We ensure timely production and delivery without compromising product quality.