Consultation
Send your product size, quantity and deadline. Not sure which board or style fits? Tell us what goes inside and we will specify it for you, then quote within 24 hours.
A two piece box is a separate rigid lid and base built from greyboard and covered with a printed paper wrap. It arrives assembled rather than flat and it does not fold down.
This is a different product from a folding carton rather than a premium version of one. It belongs on a box the customer opens slowly and then keeps, which is why jewelry and spirits and high value cosmetics all use it.
Get Custom Quote
| Specification | Detail |
|---|---|
| Structure | Rigid greyboard 1.5 to 2 mm with a printed paper wrap. |
| Lid types | Full telescope, partial telescope 25 to 30 mm, shoulder or neck box. |
| Lid fit | 0.5 to 1 mm clearance between the lid and the base. |
| Wrap options | Coated art paper, textured specialty paper, soft touch lamination. |
| Finishes | Hot foil, emboss or deboss, spot UV over a matte wrap. |
| Inserts | Folded paperboard platform, molded pulp, foam wrapped in paper. |
| Packing | Ships assembled rather than flat, so volume is higher than a carton. |
| Printing | Digital or offset on the wrap. Pantone spot color on offset. |
| Minimum order | 100 boxes per size and per design. |
| Production time | 10 to 12 business days after dieline approval. |
| Samples | A plain structural sample takes 3 to 5 working days and a printed sample takes 7 to 10. |
| Pricing | No setup or tooling charge. Break at 1,000 units. |
| Artwork and design | AI, EPS or PDF on our dieline. Design support free at every stage. |
| Shipping | Free shipping worldwide on all orders. |
The structure is greyboard at 1.5 to 2 mm, which is roughly four times the thickness of a retail carton. The board is cut and cornered into a tray, then a printed wrap is glued over the outside and folded around every edge.
The wrap is a separate operation after the board is cut. Rigid work therefore runs 10 to 12 business days rather than the 8 to 12 we quote on folding cartons. The box also ships assembled, which means a pallet holds far fewer units than the same order in flat cartons.
None of that is a drawback when the box is doing the right job. It is a real cost when a rigid box has been chosen for a product that gets unwrapped in ten seconds. For a product like that, one of our lighter custom box styles does the same job for less.
The first decision is how far the lid comes down over the base. It changes the proportion of the finished box and it changes how much board and wrap you pay for.
A full telescope lid covers the whole height of the base and reads as formal, which is why it is common on spirits. A partial telescope covering 25 to 30 mm is the standard gift box proportion and it is what most customers picture. A shoulder box holds the lid above the base on an inner neck and it is the most premium of the three because it adds a third component.
Tell us which one you want at the quote stage. Changing lid type later is a new die rather than a setting we adjust.
A rigid lid needs about 0.5 to 1 mm of clearance over the base. Too tight and the lid binds or drags the wrap as it lifts. Too loose and it slides around, which reads as cheap however good the printing is.
That tolerance is why a sample matters more on this style than on any other. Order a plain or printed sample and open it a few times before you release the run.
Everything the customer sees and feels is the wrap so this is where the budget belongs on a rigid box. Coated art paper takes full color printing and it accepts gloss or matte lamination over the top.
Textured specialty paper in linen or felt gives a surface that photographs well and it usually carries foil rather than process print because texture breaks up fine detail. Soft touch lamination is the finish most worth paying for here because the customer holds this box for far longer than a carton.
Hot foil stamping is real metallic leaf and it reflects properly, unlike metallic ink printed flat. Embossing and debossing work on a bold logo with clear edges while fine detail flattens out under the die.
A rigid box almost always needs an insert because the product must not move when somebody lifts the lid. A folded paperboard platform is the cheapest option and it recycles with the box.
Molded pulp grips irregular shapes and tolerates small differences between production batches. Foam wrapped in printed paper gives the most controlled fit for glass or electronics. Use it when the product has to survive shipping inside the gift box.
Tell us the product weight and whether anything inside is fragile. We quote the insert as part of the set rather than as an afterthought because the insert changes the internal dimensions of the base.
The wrap prints on a flat sheet before it is applied so print quality on a rigid box is as good as on any of our custom boxes. Digital printing suits short runs and several designs in one production run. Offset takes over above about 1,000 units and it holds a named Pantone spot color exactly.
Inside wrapping is available as well. A printed inner surface on the lid and base is a small cost next to the box itself. It is also the last thing a customer sees before the product comes out.
Send artwork as an AI, EPS or PDF file set on our dieline in CMYK at 300 dpi with 3 mm of bleed. Design support is free at every stage so we will fix a file that is not print ready rather than send it back.
Two limits apply whatever you choose. Keep positive type at 6 pt or larger and reversed type at 8 pt or larger because ink spreads slightly on board and fine reversed type fills in. Keep every line weight at 0.25 pt or above for the same reason.
The minimum is 100 boxes per size and per design. There is no setup or tooling charge on the first order or on any reorder and the price break lands at 1,000 units.
Production runs 10 to 12 business days after you approve the dieline because the wrapping is a separate operation after the board is cut. A plain structural sample takes 3 to 5 working days and a printed sample takes 7 to 10. Shipping is free worldwide on every order.
Email Sales@boxesexpert.com with your dimensions and quantity and we will send a dieline, a 3D mockup and a price.
Creating custom boxes is now easy with us. See how our process works.
Send your product size, quantity and deadline. Not sure which board or style fits? Tell us what goes inside and we will specify it for you, then quote within 24 hours.
Upload your artwork and our team will refine it to perfection. No artwork? No problem. Just tell us about your product and we will turn your ideas into beautifully designed packaging.
Nothing reaches the press until you approve it. You get a digital proof as standard and a physical sample on request, so you can check everything yourself before the full run.
After production, every box goes through our strict quality control process to ensure it meets our standards. Once approved, your packaging is carefully prepared and delivered free to your own doorstep.
What buyers ask before ordering custom two piece rigid boxes: how they are built, lid types and fit, wrap and finish choices, inserts and lead time.
Apart from branding benefits, we deliver premium packaging solutions that combine durability, quality printing, and eco-friendly materials. Our team ensures every box meets your brand’s identity and market needs.
We use high-grade materials and advanced printing technology to ensure superior packaging quality.
Competitive rates designed to support businesses of all sizes.
We ensure timely production and delivery without compromising product quality.