Home / Box Styles / Straight Tuck End Boxes
‹
Custom straight tuck end box with the top flap open
›
Custom straight tuck end box with the top flap open
Custom straight tuck end box closed
Flat dieline template for a straight tuck end box

Straight Tuckend Boxes

A straight tuck end box folds both end flaps in the same direction so both tucks close at the back of the carton. The front panel stays completely clean. That is why this style carries more retail printing than any other folding carton we produce.

It ships flat and squares up in one movement and prints beautifully on flat board. We cut and print straight tuck end cartons in Neptune, New Jersey. The minimum is 100 boxes per size and per design and there is no setup or tooling charge.

Get Custom Quote


Straight tuck end box specifications

Custom straight tuck end boxes specification sheet
Specification Detail
Box styleStraight tuck end as standard. Reverse tuck end on request.
Board300 to 350 GSM SBS single item. 350 to 400 GSM larger cartons. 350 GSM uncoated kraft.
SizingInternal length by width by depth. 3 to 4 mm clearance. Board adds about 0.8 mm outside.
Flaps and locksTuck depth set from box depth. Slit locks above 60 mm deep.
Window optionOpen window or PET patch on any panel.
PrintingDigital below 1,000 units. Offset above. Pantone spot color on offset.
FinishesGloss, matte, soft touch, spot UV, hot foil, emboss or deboss.
Artwork limitsPositive type 6 pt minimum. Reversed type 8 pt. Line weight 0.25 pt.
Minimum order100 boxes per size and per design.
Production time8 to 12 business days after dieline approval.
SamplesA plain structural sample takes 3 to 5 working days and a printed sample takes 7 to 10.
PricingNo setup or tooling charge. Break at 1,000 units.
Artwork and designAI, EPS or PDF on our dieline. Design support free at every stage.
ShippingFree shipping worldwide on all orders.

Everything about custom straight tuck end boxes

How the structure works

Each end of the carton has one tuck flap and two dust flaps. The dust flaps fold in first and do the quiet work because they stop the product pushing out sideways and give the tuck something to slide against.

Tuck depth is calculated from the depth of your box rather than set at a fixed figure. A deeper carton gets a deeper tuck so the flap stays shut inside a bag or a shipper. Past about 60 mm deep we add slit locks, which are small cuts either side of the tuck that hold it under the weight of the contents.

Give us internal dimensions in length by width by depth order and add 3 to 4 mm of clearance around the product. The board itself adds about 0.8 mm to each outside dimension, which matters when your shelf space is already fixed.

Straight tuck or reverse tuck

A reverse tuck end is the same carton with the flaps folding in opposite directions. It nests slightly better on the printing sheet so it costs a little less to die cut but one tuck edge then sits on the front panel.

On busy artwork nobody ever notices that edge. On a minimal design with flat color and white space you will notice it every time and the saving is not worth taking. We quote either version on the same dieline, and you can compare both side by side with our other box styles.

Choosing the board

Board grade decides whether the front panel stays flat on a shelf. The most common complaint on a tuck end carton is a panel that bows inward and that is a material problem rather than a printing problem.

Use 300 to 350 GSM SBS for a single retail item and 350 to 400 GSM once the carton gets larger or holds more than one piece. Uncoated kraft needs about 350 GSM because the fiber is softer. Anything below 300 GSM saves very little per unit and the difference shows the moment somebody picks the box up.

Tucked flaps have a limit. Past about a pound of packed weight the base starts to sag and an auto lock bottom structure becomes the right choice. A box that ships alone through a courier network needs corrugated instead.

Printing options

Two printing methods cover every order and your quantity decides which one you get. Digital printing costs less below about 1,000 units. It also carries several designs through one production run at the same unit price, which suits a variant range.

Offset printing takes over above roughly 1,000 units on one artwork. It also holds a named Pantone spot color exactly because the ink is mixed to that published recipe rather than built from four process inks. Name the one or two colors that carry your brand as Pantone numbers and let everything else build from CMYK.

Inside printing is available on any run and it is worth considering on a gift carton because the inside face is the last surface a customer sees.

Finishes worth paying for

Every finish is another pass through another machine so cost climbs in steps. The third finish rarely gets noticed next to the first two.

Lamination is the one finish that also does a job. Gloss or matte lamination protects the print through the supply chain and keeps the carton looking new on a shelf. Soft touch lamination changes how the box feels rather than how it looks.

Spot UV puts high gloss on selected areas over a matte base and it needs its own file layer. Hot foil stamping is real metallic leaf and it reflects in a way metallic ink never does. Embossing works on bold shapes with clear edges while fine detail flattens out under the die.

Structural options on the same dieline

A window shows the product without opening the carton. It can be left open or covered with a clear PET patch and it should sit away from the crease lines so the panel keeps its stiffness. A hang hole turns the same carton into peg ready packaging.

A tear perforation gives the customer a clean way in. A folded paperboard divider holds several pieces apart inside and it recycles with the box. All of these are die changes rather than new products so they cost far less at the dieline stage than later.

What your artwork has to hold

Send artwork as an AI, EPS or PDF file set on our dieline in CMYK at 300 dpi with 3 mm of bleed. Design support is free at every stage so we will fix a file that is not print ready rather than send it back.

Two limits apply whatever you choose. Keep positive type at 6 pt or larger and reversed type at 8 pt or larger because ink spreads slightly on board and fine reversed type fills in. Keep every line weight at 0.25 pt or above for the same reason.

Ordering and lead times

The minimum is 100 boxes per size and per design. Each size needs its own die so two sizes on one artwork counts as two minimums. There is no setup or tooling charge on the first order or on any reorder and the price break lands at 1,000 units.

Production runs 8 to 12 business days after you approve the dieline. A plain structural sample takes 3 to 5 working days and a printed sample takes 7 to 10. Shipping is free worldwide on every Boxes Expert order.

Email Sales@boxesexpert.com with your dimensions and quantity and we will send a dieline, a 3D mockup and a price.

How To Get Started

Creating custom boxes is now easy with us. See how our process works.

Consultation

Send your product size, quantity and deadline. Not sure which board or style fits? Tell us what goes inside and we will specify it for you, then quote within 24 hours.

Design

Upload your artwork and our team will refine it to perfection. No artwork? No problem. Just tell us about your product and we will turn your ideas into beautifully designed packaging.

Proof

Nothing reaches the press until you approve it. You get a digital proof as standard and a physical sample on request, so you can check everything yourself before the full run.

Delivery

After production, every box goes through our strict quality control process to ensure it meets our standards. Once approved, your packaging is carefully prepared and delivered free to your own doorstep.

Frequently Asked Questions

What buyers ask before ordering custom straight tuck end boxes: the difference from a reverse tuck, board grades, sizing and clearance, minimum quantities and what the artwork has to hold.

A straight tuck end box is a flat folding carton with a tuck flap at the top and the bottom, and both flaps fold in the same direction. That keeps both tuck edges at the back of the box and leaves the front panel completely clean for your artwork.
The flaps fold in opposite directions on a reverse tuck, so one tuck edge sits on the front panel. A reverse tuck nests a little better on the sheet so it costs slightly less to die cut. A straight tuck keeps the front face clean, which matters on minimal designs with large flat areas of color.
Use 300 to 350 GSM SBS for a single retail item and 350 to 400 GSM once the carton gets larger or holds more than one piece. Uncoated kraft needs about 350 GSM because the fiber is softer. Below 300 GSM the panels bow on a shelf even when the print is good.
The minimum is 100 boxes per size and per design. Each size and each design needs its own die, so two sizes on one artwork counts as two minimums rather than a single order of 200.
Add 3 to 4 mm around the product so it slides in cleanly on a packing line. Always give us internal dimensions in length by width by depth order, because the board itself adds about 0.8 mm to each outside dimension.
Up to about a pound it holds perfectly well. Above that the tucked base starts to sag and eventually gives way while somebody is carrying it, so we would move you to an auto lock bottom carton instead.
Yes. The window can be left open or covered with a clear PET patch, and it can sit on the front panel or wrap around a corner. Keep the window away from the crease lines so the panel keeps its stiffness.
Production runs 8 to 12 business days after you approve the dieline. A plain structural sample takes 3 to 5 working days and a printed sample takes 7 to 10. which is the only reliable way to judge the board weight before you commit to a run.

Why Choose Us For Custom Boxes?

Apart from branding benefits, we deliver premium packaging solutions that combine durability, quality printing, and eco-friendly materials. Our team ensures every box meets your brand’s identity and market needs.

Premium Quality

We use high-grade materials and advanced printing technology to ensure superior packaging quality.

Affordable Pricing

Competitive rates designed to support businesses of all sizes.

Fast Delivery

We ensure timely production and delivery without compromising product quality.