Custom boxes by industry

We recommend material, style and specifications of a box based on what is your product. How it will be sold or shipped. A cake box and a vape box may be the same size and cost within a cent of each other, yet almost nothing about the specification matches. That is why our product pages are grouped by industry rather than by shape.

Pick your industry below to see every format we run for it. Each product page carries the sizes, the board range and the ordering terms for that specific product.

Get a Quote

Bakery5 formats

Measure the size of cake or pastry. We design boxes with enough clearance for the lid to close without touching the frosting.

See all 5 formats

Food and Beverage5 formats

Will the food be packed as hot, contains butter or oil, or touch the box directly? So we will use a PFAS free clay coat.

See all 5 formats

Confectionery2 formats

Food grade board and low migration inks, with panel space reserved for the allergen declaration.

Cosmetics and Beauty11 formats

Measure the size of product including lid or outer wrapping. So the product fits perfectly when customer buys it.

See all 11 formats

CBD and Cannabis6 formats

Child resistant closures and warning panels have to exist in the dieline before plates are cut.

See all 6 formats

Vape and Tobacco2 formats

Tamper evident seals, nicotine disclosure and age restriction text, all planned into the panel layout.

Gifts and Events5 formats

Short personalized runs. Digital printing keeps a hundred boxes with names and dates economical.

See all 5 formats

Apparel and Retail2 formats

Sized to the folded garment. Retail board for a shelf, E flute corrugated if the box ships alone.

Ecommerce and Shipping6 formats

Specified by flute and filled weight, because carriers bill on dimensional weight every shipment.

See all 6 formats

Toys and Games1 format

Two piece telescoping rigid boxes, with insert wells cut for sleeved cards rather than bare ones.

What decides the specification in each industry

The below table shows what to share with us before requesting a quote for your product.

IndustryWhat governs the specBoard and barrierWhere orders go wrong
BakeryInternal height above the product350 to 400 GSM food grade, clay coated for iced workA lid that touches the piping
Food and BeverageOil and steam from a hot fillPFAS free clay coat or greaseproof linerSpecifying heavier board instead of a coating
ConfectioneryAllergen and ingredient textFood grade SBS with low migration inksNo clean panel left for the declaration
Cosmetics and BeautyThe filled bottle, not the empty one14 to 24 pt SBS, kraft or rigid greyboardFragrance oil bleeding into uncoated board
CBD and CannabisThe child resistance standard in your stateRigid or tuck carton with a tested closureA generic CR closure that fails the local rule
Vape and TobaccoMandatory disclosure and age textTuck end or rigid with a tamper evident sealPanel space found after plates are cut
Gifts and EventsRun size and the delivery dateColored or textured stock, foil over matteOrdering offset when a hundred units is the need
Apparel and RetailThe fold, then the transit route18 to 24 pt SBS on shelf, E flute if it shipsPosting a folding carton with no corrugated
Ecommerce and ShippingFilled weight and dimensional weightF, E or B flute, EB double wall above 12 kgFlute chosen from the empty product weight
Toys and GamesComponent depth and sleeved card size1.5 to 3 mm greyboard, litho wrappedInsert wells cut for unsleeved cards

Two rows repeat across almost every industry. Barrier is a coating decision rather than a caliper decision, and panel space has to be reserved at dieline stage because tooling cannot grow later. The product page for your row carries the sizes and the full build.

Food contact and regulated categories

Four rows above carry rules that go beyond preference. These are the facts that decide whether an order is compliant.

Food contact. Boxes Expert supplies food grade board and low migration inks as standard across bakery, food service and confectionery work. Where a grease barrier is needed we quote a clay coat or a greaseproof liner. Every food contact stock we supply is free of intentionally added PFAS. Fluorinated grease treatments are now restricted in California, New York, Washington and a growing number of other states. Recycled board is fine for an outer carton but not for an insert that sits against the product.

Child resistance. For CBD, cannabis and vape products the standard varies by state and by country. A push and turn closure and a press and slide zipper are not interchangeable, and a closure that satisfies one market can fail another. We build the closure and the panel to the requirement you give us. Confirm which standard applies with your own regulatory contact before a run.

Cosmetic claims. A bar of soap sold as soap is regulated differently from one that claims to moisturize or treat acne. Making the claim moves the product into a fuller ingredient declaration in descending order. Leave a clean panel of at least 40 by 60 mm for it at dieline stage rather than after.

What stays the same whatever you sell

The specification changes by industry but the commercial terms do not. These apply to every page in the grid above.

TermApplies across every industry
Minimum order100 boxes per size and per design
Production8 to 12 business days after dieline approval, 10 to 15 for rigid work
SamplesA plain structural sample takes 3 to 5 working days and a printed sample takes 7 to 10.
Setup and toolingNo charge on your first order or on any reorder
Price break1,000 units on the same artwork
Design supportFree at every stage, including fixing a file that is not print ready
ArtworkVector PDF, AI or EPS on our dieline, CMYK, 300 dpi, 3 mm bleed
ShippingFree shipping worldwide on all orders

The minimum order quantity is 100 boxes per size and design. If you use the same artwork on 2 different sizes of box, the total will be 200 boxes.

What if your product is uniquely different?

Can’t find a box for your product here? Send us the image, dimensions and of your product. Our team will help you choose or make a custom box style.

If you don’t know the structure of your box, then visit box style pages to get an idea about the dieline and size of box. Otherwise tell you can read our to if you don’t have any idea, we can specify it for you. What goes inside, what the filled weight is, and whether the product touches the board directly. Those answers decide these things decide the material, style and special requirements of job. The same approach runs across all of our custom packaging boxes whichever industry you sell into.

Request a Packaging Quote

Send your dimensions, your quantity and your artwork, or just a logo if that is all you have. You get a quote and a free dieline within 24 hours, then a digital proof or a physical sample before anything goes to press.

Email Sales@boxesexpert.com. We are on Copper Dr, Newport, DE 19804, USA and we answer from 8am to 5pm EST on weekdays.